Need Our Assistance?

F80/F82 Cluster Adapter

In case if you will need to go to Dealer, you will need to remove F80/F82 Cluster and install stock one so dealer does not mess up stuff.

In this case, instead of removing spliced wires, you just unplug connector from adapter, and insert it into the plug that comes with wiring with label "for service use"

Technical specifications

Power consumption when on: 50 ma

Power consumption when in standby: 10ma


Connect Adapter – to Cluster connector A71*1B


You will need to use same power feed for cluster and adapter

CAN wires – You will need to cut them,


To car side - connect to CAN1 wires of adapter (White, Green)
To cluster side - connect to CAN2 wires of adapter(Orange, Brown)